J.C. Uhling HP 2000 Case Clamp
  • Clamping Capacity 50″L x 46″H x 24″D
  • Clamping (2) Dual Pod Pressure Bars
  • 30 Second Set-up / Changeover Time
  • Heavy Duty Quality Construction
  • Manufactured in the U.S.A.
  • All Additional Features of the HP 3000

The HP 2000 is a compact, quick and easy to use Case Clamp. It’s clamping capacity is 50″ long x 42″ high x 24″ deep, which will accommodate 80-90% of your case goods. The HP 2000 can also be used as a drawer clamp.

The HP 2000 is ideal for a small shop or as a secondary clamp.

Call for pricing 208.962.3271

Increase Productivity:
Super quick changeover (30 seconds)

Reduce Operator Fatigue:
Effortless operation, requires little employee training

Produce Better Quality Cases:
Accurate performance

Increase Your Bottom Line:
No down time due to machine failure

Can be Customized for Your Individual Needs

This clamp is impressive. I really like its quick changeover and ease of operation. The individual pressure bar front and rear selection is a tremendous feature. We now operate 4-HP3000 Case Clamps.

Mr. Bill Chalmers, HANOVER KITCHENS

We own several Uhling Case Clamps including customized units. Uhling Products Company was able to make alterations to our clamps that allowed us to clamp larger pieces as well as many different sizes. They also mounted 2 air cylinders which increased the speed of operation. I have found these clamps to be very durable, easy to use and affordable.

Mr. Peter Raynsford, HARDEN FURNITURE, INC.

Feature Benefit
50″ Long x 46″ High x 24″ Deep clamping capacity. Compact inexpensive clamping envelope yet large enough for 80%-90% of your case goods.
Two (2) counterweight balanced fully adjustable dual pod pressure bars. Allows you to apply pressure directly over the joint pod pressure bars. thus resulting in a better joint. The counterweight balancing makes allows for a quick and easy set-up and changeover.
Optional third pressure bar. Increases versatility of clamp.
Roller bearing mounted carriage with pneumatic locks. Allows for a quick and easy set-up and changeover.
Heavy duty steel and quality construction. Allows for years of continuous trouble free use.
Front/rear pressure selection. Allows you to only apply pressure where needed enabling you to perform secondary operations such as installing your backs in your cases while they are in the Case Clamp.
Solid back support for all pressure bar settings. Allows for a quick and easy set-up and changeover.
Carriage mounted operators panel. Allows for quick access to controls.
Vertical design. Reduces floor space requirements thus reducing overhead.
Clamps cabinets in upright position. Allows the clamp to be used as a work station if desired to install doors, hardware etc. thus reducing handling.
Simplicity and user friendliness. Reduces training, operator error and fatigue thus increasing productivity and improving employee
moral.